UPS-96-12-S

12 VDC – 96W Industrial-grade UPS

Integrated SuperCAPS Battery

Categoria: UPS

INDATECH Industrial UPS

BACKUP TIME OF UPS 12VDC 96W

UPS 12VDC 96W LED STATUS

Specifiche tecniche

INPUT
Input Voltage:	12 VDC
Input Voltage range:	11.5 ~ 16 VDC
Electric strength max:	18 VDC
Fixed connect threshold:	Undervoltage: 18 VDC Voltage drop IN/OUT: 0.6 VDC max
Current consumption:	Rated current: 8.1 A Max current: 9 A Current w/o Load: 100 mA Current charge: 3.5 A
Power consumption:	Rated power: 97 W Max power: 108 W Power charge: 42 W
Internal input fuse:	15 A
Switch-on time:	5 sec

OUTPUT
Output Voltage:	12 VDC
Output Voltage range:	(Input voltage) – 0.6 VDC
Capacitive load:	3000 µF (at start)
Output current:	8 A
Output Power:	96 W
Short-circuit proof:	Yes
No-load proof:	Yes
Overcurrent shutdown:	8.2 ~ 8.4 A for max 3s 8.5 ~ 10.8 A for max 100ms > 10.8A for max 5ms

MECHANICAL & ENVIRONMENTAL CONDITIONS
Flammability class:	V0
Weight:	0.6 kg
UPS Connection:	Parallel: NO Series: NO
Degree of protection:	IP 20
Protection class:	III (without PE)
Mounting type:	DIN-Rail mounting
Housing version:	Aluminium
Dimension:	(W)63x(H)120x(D)100 mm
Operation Temperature:	-20 ~ +60°C
Storage Temperature:	-30 ~ +65°C
Max. Humidity:	≤ 95% (at +25°C, no dew)
Climate Class:	3k3 (EN 60721)
Degree of pollution:	2
Overvoltage Category:	EN 61010-1: I EN 61010-2-201: I

CONNECTION
Connection INPUT/OUTPUT	Method: Screwable plug connector Conductor cross-section: 0.129 mm² ~ 1.31 mm² Stripping length: 6 mm ~ 7 mm
Connection RELAY	Status (configurable): Power Fail Alarm Switching voltage: 24 VDC / 125 VAC Current Capacity: 1 A (DC) / 0.5 A (AC) State (configurable): NO / NC
Data Interface USB	Connection Method: USB Type B (F) Transmission physics: USB 2.0 Protocol: VCOM, HID Electrical Isolation: NO Chipset: NXP Transmission length: ≤ 3m
Data Interface RS232	Connection Method: DSUB 9-Pin (F) – DB9 Transmission physics: RS232 light (TX / RX) Baud Rate: 38400 Type of cable: 1:1 Electrical Isolation: NO Chipset: NXP Transmission length: ≤ 10m Voltage Level: -6 ~ +6 VDC

INTERFERENCE IMMUNITY ACCORDING TO EN 61000
Electrostatic discharge – EN 61000-4-2	Contact discharge: 4kV Air discharge: 8kV Comment: Criterion B
Electromagnetic HF Field – EN 61000-4-3	Frequency range: 80MHz ~ 1GHz Test field strength: 10V/m Frequency range: 1.4GHz ~ 2GHz Test field strength: 3V/m Comment: Criterion A
Fast transients (Burst) – EN 61000-4-4	Test voltage: 2kV Comment: Criterion A
Surge voltage load (Surge) – EN 61000-4-5	Test voltage L-N: ± 1kV Test voltage L-PE, N-PE: ± 2kV Comment: Criterion A
Power frequency magnetic field immunity – EN 61000-4-8	Test level: 30 A/m Comment: Criterion A

Criterion A Normal operating behavior within the defined limits

Criterion B Temporary impairment of the operating behavior,that is corrected by the device itself

HARDWARE INSTALLATION GUIDE
NAME	VERSION	TIME	SIZE	DOWNLOAD
UPS-96-12-S HIG	TBD	TBD	TBD